Click here to Create your own fountain.

Seattle

Barcelona

Canterbury

Roxbury

Does your fountain need a vault? 

If your water feature requires water in excess of 300 gallons per minute (GPM), it may be more economical to use a dry pump rather than submersible pumps.

If it is more cost effective to have a dry pump, a STONEWEAR Pre-Engineered Vault is an affordable alternative.

In its most common configuration, it is made to be buried approximately  12 inches below grade with a finished stone manhole cover to allow ongoing access.

When it arrives at the job site it is already pre-plumbed and ready to be attached to the site plumbing and electrical conduits. The entire large top is removable to allow unlimited access during the installation process. 

Typical Components Include:

• Pump and leaf trap
• Water filter
• Water sanitizing system
• Separate controls for:
  • Main drain
  • Skimmer
  • Water fill
  • Automatic water make-up
  • Each circuit in water feature
  • Pump isolation valves and flange fittings for service removal
• Electrical breaker box for:
  • Pump (s)
  • Fountain lights
  • Secondary 
• Pre-plumbed for storm sewer drain
• Automatic sump pump for high ground water conditions

Recommend this page to a friend!