Table Installation

Installation Instructions

Table Base and Top

1. Locate desired position for table pedestal.

2. Secure pipe flange to slab with 1/4 x 3" wedge anchors or similar.

3. Screw 2" pipe into secured pipe flange and confirm it is straight with a bubble level. Shim pipe flange to level.

4. Place table base over pipe and bring top to location with help of another person.

5. Place table top so flange thread engages pipe thread and start by rotating table top until snug fit where table base is clamped solid between deck and table top. Place four dabs of Sikaflex at intersection between top of base and bottom of table.

Stools

1. Experiment with stool location and mark with pencil or similar on deck. Usualy the edge of the stool is tangent to the table top edge.

2. Use 4 dabs of Sikaflex adhesive on base of stool and place as desired.

3. If attachments ever need to be removed, the perimeter dabs can be sawed with a long flexible serrated blade. A wire with two wooden handles can be placed under the stool and the attachments can be severed with a sawing motion back and forth.

Recommend this page to a friend!

Click here to go to the STONEWEAR home page.